مرکز سازه های قاب فلزی سبک LSF

1. Attach end of StiffClip HC to hip beam with required number of fasteners.

2. Next, attach StiffClip HC to roof joist framing member with required number of screws.

1. Place StiffClip PL on framing member chords and/or webs as designed.

2. Attach StiffClip PL to framing members with symmetrically placed required number of screws.

1. Attach StiffClip JH to beam with required fasteners. Use blocking behind clip if clip length is less than beam depth.

2. Place joist on ledge of StiffClip JH and attach clip to joist with required screws.

1. Attach one angle of StiffClip JC to floor beam through guide holes with approved number of screws.

2. Place floor joist over StiffClip JC. Attach joist to clip with approved number of screws.

1. Fit DriftTrak^® into top track and secure to deck with approved fastener.

2. Twist clip into place within DriftTrak^®. Ensure stiffener is in place prior to installation.

3. Fasten to stud using provided screws through Step Bushings.

Note: Allow a minimum of 0.875” from the structure to the top of the stud to allow for the attachment of DriftTrak inside the standard track.

1. Attach track to structure with required fasteners.

2. Attach DriftClip DSLD to structure with required fasteners through each Step Bushing.

3. Attach DriftClip DSLD to stud with provided #8 screws through each Step Bushing.

1. Attach track to structure with required fasteners.

2. Attach DriftClip DSL to structure with required fasteners through each Step Bushing.

3. Attach DriftClip DSL to stud with provided #12 screws through each Step Bushing.